Tips For Riding Recumbent Bicycles
Riding a bike is a great way to get exercise and in most cases can save strain on your shins and knees from running. Most people think of a traditional bike when they decide to start up this exercise, but a trend towards recumbent bicycles is surging. They are different in design from the traditional bike but allow you to sit back, relax, and enjoy the scenery when going on a ride. Because of their different design, it is important to remember a few things before your first trip.
First, mounting and dismounting are different. You need to swing your leg forward instead of backward over the frame. If you swing the leg backward, you may hit the reclining seat and probably fall over.
Before you start the ride it is important to adjust it for your fit. Set your handlebars and seat so that you can reach the handlebars and pedals without having to lean forward. This will allow you to sit back and enjoy the ride without struggling.
Hold the brakes when you mount and dismount. Though this may be common sense, many people forget this and the front wheel turns or rolls causing them to fall. Simply holding the brake will prevent this issue.
This cycle is not designed to stress you while you ride. With this in mind, be sure to start in a low gear and use the gears appropriately to be able to enjoy your ride. You can get great exercise without having to be a speed demon.
There is some debate on how to set your pedal before starting. Some suggest 2 o'clock but a 12 o'clock position is best for beginners. This allows you to put one foot on the pedal to get a good strong start.
While riding the bike, sit back and relax. This is designed with this purpose in mind. On other bikes, you lean forward and are looking at the ground just in front of you. Here, you actually need to look up and forward so you can use the bike to its full potential.
Use the pedal to get started. As stated before, you should start by pushing on the pedal. Quickly move your ground foot to the other pedal to keep going. Since you are starting in a reclining position you will not have enough leverage to push from the ground to get started like you would with a ten speed.
Stopping is also different. When you apply the brake you need to plant both feet on the ground and make sure the wheels are in a straight alignment. The tendency is to turn the handlebars to allow you to put one foot down. This bike does better if you plant both feet with the handles straight to avoid falling over since you are riding in a reclining position.
These cycles are designed so you can enjoy the ride. Remember not to focus on the ground and use a light touch with the handlebars. You'll feel better and be able to ride farther and longer because of the reclining position. You won't tire as easily as a speed bike ride and your knees and shins will thank you.
First, mounting and dismounting are different. You need to swing your leg forward instead of backward over the frame. If you swing the leg backward, you may hit the reclining seat and probably fall over.
Before you start the ride it is important to adjust it for your fit. Set your handlebars and seat so that you can reach the handlebars and pedals without having to lean forward. This will allow you to sit back and enjoy the ride without struggling.
Hold the brakes when you mount and dismount. Though this may be common sense, many people forget this and the front wheel turns or rolls causing them to fall. Simply holding the brake will prevent this issue.
This cycle is not designed to stress you while you ride. With this in mind, be sure to start in a low gear and use the gears appropriately to be able to enjoy your ride. You can get great exercise without having to be a speed demon.
There is some debate on how to set your pedal before starting. Some suggest 2 o'clock but a 12 o'clock position is best for beginners. This allows you to put one foot on the pedal to get a good strong start.
While riding the bike, sit back and relax. This is designed with this purpose in mind. On other bikes, you lean forward and are looking at the ground just in front of you. Here, you actually need to look up and forward so you can use the bike to its full potential.
Use the pedal to get started. As stated before, you should start by pushing on the pedal. Quickly move your ground foot to the other pedal to keep going. Since you are starting in a reclining position you will not have enough leverage to push from the ground to get started like you would with a ten speed.
Stopping is also different. When you apply the brake you need to plant both feet on the ground and make sure the wheels are in a straight alignment. The tendency is to turn the handlebars to allow you to put one foot down. This bike does better if you plant both feet with the handles straight to avoid falling over since you are riding in a reclining position.
These cycles are designed so you can enjoy the ride. Remember not to focus on the ground and use a light touch with the handlebars. You'll feel better and be able to ride farther and longer because of the reclining position. You won't tire as easily as a speed bike ride and your knees and shins will thank you.
About the Author:
You can get a detailed overview of the things to consider when buying recumbent bicycles and view our selection of bicycles at http://www.utahtrikes.com/PROD-11617617.html right now.
Commentaires
Enregistrer un commentaire